Free shipping from $70 to the lower 48 states and Canada

30-day returns on unused knives

Karambit Desert Fox Damascus Hunting Knife with its leather sheath

Karambit Desert Fox Damascus Hunting Knife, photo 2

Karambit Desert Fox Damascus Hunting Knife, photo 3

Karambit Desert Fox Damascus Hunting Knife, photo 4

Karambit Desert Fox Damascus Hunting Knife, photo 6

Karambit Desert Fox Damascus Hunting Knife, photo 7

Karambit Desert Fox Damascus Hunting Knife with its leather sheath

Karambit Desert Fox Damascus Hunting Knife, photo 2

Karambit Desert Fox Damascus Hunting Knife, photo 3

Karambit Desert Fox Damascus Hunting Knife, photo 4

Karambit Desert Fox Damascus Hunting Knife, photo 6

Karambit Desert Fox Damascus Hunting Knife, photo 7

Karambit Desert Fox Damascus Knife with Leather Sheath

$69.99 USD

~~$79.99 USD~~

-13%

The Karambit Desert Fox is the odd one out and our smallest knife: 8 inches and 5.5 oz. The 3.5 inch Damascus hawkbill has its edge on the inside of the curve, so it cuts as you pull, and the finger ring is cut from the blade steel over a full tang. It suits utility work like cord, rope and boxes, and it looks like nothing else on a shelf.

8 in Overall

3.5 in Blade

4 in Handle

5.5 oz Weight

Handcrafted Damascus

The Blade

Handle and Guard

The Sheath

Shipping, Returns and Warranty

A hawkbill Damascus blade with a steel finger ring that is part of the blade itself. At 5.5 oz, it is the lightest knife we make.

Bigcat vs a budget Damascus-look knife

Plenty of knives sold as Damascus at this price are one plain steel with a pattern etched on top, finished by machine and packed with a nylon pouch. Yours is pattern-welded from two steels, finished by hand and carried in a leather sheath made for it. Here is the difference, line by line.

Karambit Desert Fox Damascus Hunting Knife with its leather sheath

Bigcat

Real Damascus, 288 layers

The pattern runs through the steel

Handcrafted in Wazirabad

Craftsmen with generations behind them

Leather sheath included

Hand-stitched, carried on your belt

12-month warranty

Against defects, in plain words

A plain mass-produced stainless hunting knife with a moulded plastic handle

A typical factory knife

A surface pattern

Etched or printed onto plain steel

Machine finished

Made to a price

Nylon sheath, or none

Often sold separately

Warranty unclear

Hard to find who stands behind it

From bar stock to your belt

Every Bigcat is made by hand, one step at a time. Six of them, and the reason no two blades leave the shop the same.

A glowing billet of layered steel under a hammer on the anvil

Two steels, 288 layers

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Hardened in oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

Ground blade by blade

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

Etched to wake the pattern

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

A sheath cut for this blade

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

Oiled, boxed, ready

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

A glowing billet of layered steel under a hammer on the anvil

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

A glowing billet of layered steel under a hammer on the anvil

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

A glowing billet of layered steel under a hammer on the anvil

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

A glowing billet of layered steel under a hammer on the anvil

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

A glowing billet of layered steel under a hammer on the anvil

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

A glowing billet of layered steel under a hammer on the anvil

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

A glowing billet of layered steel under a hammer on the anvil

15N20 and 1080 forge-welded and folded into one bar. The layers are the pattern, not a print on the surface.

A red hot blade going into the quench oil

Brought up to heat and quenched, the step that puts the hardness into the steel.

Sparks coming off a blade held against the grinding wheel

The bevel, the belly and the point shaped on the wheel, one knife at a time.

A Damascus blade in the acid bath, the pattern coming up

An acid bath darkens the 1080 and leaves the 15N20 bright, so the layers step forward.

Hands stitching a leather sheath on the bench

Leather cut and shaped for this knife and stitched by hand, with a snap strap to hold it.

A cloth wiping a coat of oil down a finished blade

It ships under a coat of oil, so it reaches you bright and ready for the first day out.

To scale

Size and weight

Overall

8in19.1cm

19.1 cm8 in

Blade

3.5in8.9cm

8.9 cm3.5 in

Handle

4in10.2cm

10.2 cm4 in

Weight

5.5oz155g

155 g5.5 oz

Overall 8 in19.1 cm

Handle 4 in10.2 cm

Blade 3.5 in8.9 cm

Blade and handle drawn to scale. All measurements are approximate.

Quote card with icons for tactical, hunting and fishing, outdoors, survival, everyday carry and multi-purpose use

Four steps in making a Damascus blade: forged, quenched, sharpened and revealed

Wiping the blade with a cloth, beside four care steps: arrives oiled, never store it wet, dry it after use, a thin coat of oil

Close-up of a Damascus steel pattern behind a quote about Damascus tradition

Carving a stick with the knife, under the words Every occasion. One knife. A gift that speaks for itself

A tough tool for tough people.

Bigcat Knives

OUR STORY

Built for the wild ones who won't settle

Bigcat is made for the people who ask the most of their gear: hunters out before first light, campers who keep going where the trail ends, and collectors who can tell real Damascus from a print at a glance.

Every knife is designed in the USA and handcrafted by skilled craftsmen in Wazirabad, Pakistan, a city known for its knife makers for centuries. The one you carry is made for real work outdoors.

Designed in the USA

Each Bigcat is designed here, for hunting, camping and everyday work outdoors.
Handcrafted in Wazirabad

Skilled craftsmen with generations of experience make every knife by hand, not on a factory line.
Real Damascus steel

288 layers of 15N20 and 1080, forge-welded and folded, so the pattern runs through the steel instead of sitting on top.
Made to be collected

No two blades share a pattern. Carry yours into the field, or give it a place in your collection.

THE KNIFE

What makes a Bigcat different?

Handcrafted, not factory made

Made by hand by skilled craftsmen, so every knife has its own character.

Real 288-layer Damascus

15N20 and 1080 steel, with a pattern you can see on the spine and in the edge.

Walnut, Micarta or black wood

Handles in real wood or Micarta, fitted with a steel guard or bolster.

A leather sheath with every knife

It wears on your belt, with a snap strap that holds the knife in place.

THE BIGCAT PROMISE

The numbers behind our promise

4.7★

Average rating

Across 877 reviews of our knives.

288

Layers in every Damascus blade

15N20 and 1080 steel, forge-welded and folded.

85,000+

Knives sold

Across Amazon, Walmart and our own store since 2021.

12 months

Warranty

Against defects in workmanship and materials.

30 days

Returns

On unused knives in their original packaging. Free shipping from $70 to the lower 48 and Canada.

USA

Designed in the USA

Handcrafted by skilled craftsmen in Wazirabad, Pakistan.

What is a karambit for?

Which way does the edge face?

Is the finger ring strong?

Is it the smallest knife you make?

What is the handle made of?

How does it carry?

Customer reviews

Customer Reviews

4.6 Based on 58 Reviews

5 ★

69%

40

4 ★

19%

11

3 ★

12%

7

2 ★

0%

0

1 ★

0%

0

Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

WG

02/01/2023

Wyatt G.

The grandchildren adore the knife

I bought this knife for my grandson as a Christmas present. He has a fondness for various types of knives, and I believe he will be genuinely excited. From a proud nana.

IN

01/31/2023

Isabella N.

Top-notch quality; watch the oil when opening

The finger hole was a little small, but then again, I have big hands.

AQ

01/31/2023

Angela Q.

Fine blade

No joke

HM

01/31/2023

Harper M.

Beautiful, but...

This is a beautiful blade with nice metalwork in making the Damascus steel pattern. However, the big drawback is the finger loop, which is really rough and cuts you if you go in one direction on it. Also, there's a burn mark on the top of the blade. In terms of usefulness, it's a one star, but for beauty, it's a 5 star. Overall, I'd give it 3 stars.

GF

01/23/2023

Gina F.

Very well made and certainly worth your money

The knife is exceptionally well-made; the handle securely locks into your hand, and the Damascus pattern is stunning. The blade is a bit dull, but it's nothing that poses a significant issue.

<
<<
1
2
3
4
5
6
7
8
9
10
>>
>